turntable upgrades

tel/fax: +44(0)2380 578877
 

overview
description
versions
options
how to choose

reviews
fitting motors
linn lp12 upgrades
llp12 motor fitting
lcartridge isolator

PRINT BROCHURE


RELATED PRODUCTS

tonearms
turntables
turntable power supply
phono stages

moving magnet & moving coil cartridges

interconnect cables
hi fi accessories
cd players
amplifiers


The isolator - by the cartridge man

The Isolator
£ 85 inc VAT

The chain of a vinyl playback system links three main components, the cartridge, arm and turntable. All could collectively be called "the source". Well what if the cartridge could be further isolated from spurious vibrations caused in the system? This is exactly what the isolator achieves and the results are highly significant.

You will notice improvements in most areas of performance - most obviously in increased transparency, deeper and cleaner bass along with sweet and highly defined treble.

The isolator does not remove the need for a good tonearm but will greatly improve the performance of all but the very best arms (namely the Origin Live Conqueror)

This alteration in the finely balanced equation that is "the record player", has a profound effective on its sonic aptitude. The issues of tonearm resonance are reduced and you have applied the rule of Musical reproduction, get the source right!.

The Isolator transforms your vinyl system whatever it be, Project, Rega, Hadcock, Schroeder, Kuzma, Tri Planar, Graham, Roksan or Origin Live to name but a few. An optional longer bolt version is available for arms with headshells thicker than 4.5mm. We have found mounting in Naim arms offers no significant difference.

"This innocuous looking stainless steel sandwich may be the answer to an almost insurmountable problem. The Cartridge Mans' Isolator is constructed from two sheets of stainless steel, with a piece of compliant material placed between them. The top plate has two studs protruding which have nuts run down them, to attach the plate to the pick up arm. The pick up cartridge is simply adhered to the bottom plate via two small locating pins as the cartridge is placed onto the hi-tech glue film"..

"The differences were staggering, with the plate the stereo image width was simply huge, along with better depth and height. Bass was described with better information retrieval. Transients were certainly much clearer with a confident style of delivery. Timing in the transcription was much sharper allowing the music to pour out of the loudspeakers in an unfettered fashion. There seemed to be much more "space" around the musicians with a much lower noise floor. Vinyl and surface noise was reduced almost to silence. Intonation was easier to distinguish, as was the melody line of the music." Stewart Wennen. Writer Hi Fi World magazine

Keep an eye on the press for some quite stunning reviews on this ground breaking product from the stable of The Cartridge Man.

"There is no doubt in my mind that this isolator represents a significant advancement in the science of vinyl replay. Right now I would recommend the purchase of the Isolator to anyone with a vinyl front end priced over £300, and would put this in the same category as having a stylus force gauge and an accurate means of speed measurement, as an invaluable accessory which is mandatory for anyone serious about vinyl playback." David Allcock. Writer Hi Fi News magazine

Please phone us on 02380 578877 to place an order - this item is not available through our online shop.

The 2.4mm studs will not fit in some cartridges where the bolt hole is threaded. For these cartridges, in the main MC's, we offer a different version with a 2.0mm stud that will fit in the threaded cartridge hole.

Available in five forms:-

6-2.4: for all tested tonearms using a cartridge with non threaded mounting holes. - Almost all MM and most MC's

6-2.0: for all tested tonearms using a cartridge with threaded mounting holes, i.e. Lyra, Dynavector

10-2.4: for all tonearms with an extra thick headshell and a cartridge with non threaded mounting holes.

10-2.0: for all tonearms with an extra thick headshell using a cartridge with threaded mounting holes.

DJ: heavy duty model to keep DJ's happy in the clubs and halls.

Please Note. The Isolator is not really suited, in currently available forms, to three bolt cartridges / headshell mounting. These arms were designed for absolute coupling of the cartridge to the headshell, and the overall philisophy behind the arms is at odds with that of The Isolator. Paul Szaby in his review on The Stereo Times sums it up very well.

International Patents Pending